Install a stair runner

Painted Stairs for Under $50

The staircase is the first thing you see when you enter our house and when we moved in two years ago, it was carpeted in a builder-basic carpet that wasn’t white or tan or gray. The best way I can describe it is skinned Muppets. Dirty skinned Muppets. Just imagine Fozzie stretched out over 14 steps.

I hated them so much, I don’t even have a before picture. There wasn’t time. I realize that is a DIY blogger fail not to have a before picture, and I apologize, but friend, if you’ve ever walked into a suburban house, you’ve seen them. Unless you live in an old (read: dream) house, then you probably have skinned-Muppet stairs, too.

But that’s okay. Really it is. We can fix them and we can do it on the cheap. We painted ours for under $50! (This posts contains affiliate links for your convenience.)

Painted Stairs

Take a deep breath, friend. This is a cheap project, yes, but it’s going to be a labor of love. Ready? Of course you are. You’ve got this.

Okay, before we get too ahead of ourselves, you better take a peek at what’s underneath that carpet. Look for a place where you can pull it back a little. Most builder-grade stairs will have a tread that is in decent enough shape to paint and a riser that looks pretty rough. Sort of like this:

Painted stair makeover

This picture is a little deceiving and doesn’t show just how rough the risers looked. When you peek at your stairs, you’ll be able to see that the risers are rough and the treads are better quality wood. The treads will have some knots and of course, staple holes, but we can fix those issues.

Ripping the carpet up is the easy part. You’ll start at the top and just pull. I’m a little giddy imagining all of the POP-POP-POP sounds of staples leaving wood. This step is DIY therapy at it’s best.

Your stairs are going to look like this once the carpet is gone. You’ll be left with gross carpet padding, tack strips and thousands of staples. Grab a pair of gloves, a hammer and crowbar and start pulling everything out.

tearingupbeigebuildegradecarpet

Remember when I said this was going to be a labor of love? Here’s the part where love is a battlefield. That’s okay; heartache to heartache, we stand. Maybe grab something to drink and turn on some good music. This is going to take awhile.

Painted stair makeover

Once you have pulled everything out, you’ll need to clean the stairs. They will be filthy. Hair. Dust. Dirt. A decade-worth of yuck.

10410582_738148942953_7286185219358740617_n

Get all of that up and start filling the holes in the treads. I like and use 3M Paintable and Stainable Wood Filler. You can use a little spackle tool but I like to get in there with my fingers and fill the knots and holes. Don’t worry about the risers. We’re going to cover those up.

Now you’ll need to sand the stairs. This is going to get messy. Love is messy though, right? Press on, friend. Once everything is nice and smooth and you’ve cleaned the stairs (again,) you’re ready to paint.

Okay, here’s my little secret: The $5 sample quart at Sherwin Williams. It’s my go-to for so many DIY projects and believe it or not, I painted all of the treads on this staircase with one sample quart of Halcyon Green. No priming. I grabbed a brush and started painting every other stair tread. Once that was dry, I painted the remaining treads.

Painted stair treads and DIY stair riser
At this point, I was giddy and had to stand the riser up next to the painted tread to see how it was going to look.

But how could that possibly hold up to traffic, you ask? Honestly, I painted the stairs and didn’t touch them for a few months and the paint held up just fine through one of the worst winters we’ve ever had. If you want extra protection, here’s the trick:

 

When the paint is dry, you’ll need to brush on 2-3 coats of Polycrylic. If you do add the Polycrylic, you may want to consider a stair runner because this could make the stairs a little slick.

You can purchase pre-cut stair risers for about $10 each or save some money and cut your own. We cut our own out of thin plywood and that only cost about $20. Once we painted the risers white, we used Liquid Nails to install the risers then hit them with the nail gun so they’d be secure.

After we installed all of the risers, we used caulk to give them a seamless look and touched up the trim and risers with my favorite white, Sherwin Williams’ Pure White. Again, I used a sample quart.

Painted Stair Makeover

I snapped this (blurry) photo of Ada on the stairs, just before I finished them. If you look closely, you can see the spots where I filled the nail holes on the risers. I used a small foam roller to repaint those places so everything is crisp and seamless.

I have since added a custom-cut stair runner from Sisal Rugs Direct and this is how the stairs look today:

Sisal Rug Stair Runner

 

What do you think? Ready to take on your stairs now?

I’m linking up here:

inspiration_monday_party_zpsc6865a95

 

6 Responses

  1. Hey there! Thanks for this tutorial – just found your blog via google as I was researching ways to update my stairs :). I think I’ll give this a try!

    Also, I tried searching your blog but to no avail – do you happen to have the name/brand of the paint color on your exterior door in the very last photo? I’d be so appreciative if you can share the info!

  2. Great Job, looks fabulous!
    Thanks for the information. I’m in the process of redoing my staircase now
    and your riser fix was just what I was looking for:). Thanks!

  3. Thank you for the great suggestions! Based on your rec, I ordered my wool sisal runner from Sisal Rugs Direct as well. I was able to get a custom length and width for less than our local carpet dealers could offer.

Leave a Reply

hugge-bundle

Enter Below!

Our Storied Home’s Featured Faves